| |
JStor-4 SATA (Serial ATA) 16-bay RAID Array
with MDF (Multiple Drives Failure) capabilities
 Dual FC (Fibre-Channel) Host Interfaces
|
|
|
JStor-4 SATA 16 bay fibre-channel RAID array delivers reliable data protection combined with the blazing performance of Ultra320 SCSI to support mission critical business applications. Engineered to meet stringent demands for continuous availability, JStor SATA 16 bay fibre-channel RAID array features powerful 400MHz 64-bit RISC processor for blazingly fast I/O operations, parity-assist ASIC, completely cableless backplane-based design, and storage capacities exceeding 6TB in one small 3U enclosure.
Low service and integration costs are assured by the JStor's cableless design, three redundant hot-swappable power supplies with three independent power inputs, turbo cooling fans, and embedded RAID controller. Three year warranty comes standard with every array and covers all components.
The JStor SATA 16bay fibre-channel RAID addresses many challenges present in datacenters and delivers unparalleled storage flexibility, higher levels of data availability, management and configuration simplicity, all while securing maximum investment protection to support future growth.
|
|
Serial ATA drive capacities of 36GB (10,000 rpm), 73GB (10,000 rpm), 80GB (7,200 rpm), 120GB (7,200 rpm), 160GB (7,200 rpm), 200GB (7,200 rpm), 250GB (7,200 rpm), 300GB (7,200 rpm), and 400GB (7,200 rpm) are available.
Full 48-bit ATA addressing standard support.
Maximum capacity 6.4TB when using 400GB drives.
|
General
|
| |
RAID Architecture
|
|
64-bit RISC 400MHz CPU with 266MHz memory bus
Up to 1600 Mbytes/sec internal bandwidth
133 MHz PCI-X interface to the backplane
|
| |
Host Bus Interface
|
|
Two, 2Gbit/sec Fiber Channel Optical SFP, LC cables
|
| |
Disk Bus Interface
|
|
Sixteen 1.5 Gb PHY Serial ATA Interface channels; 48-bit addressing
|
| |
Command Queuing
|
|
253 commands (host SCSI channels)
|
| |
Cache
|
|
Up to 1GB (using one, industry-standard DDR SDRAM)
|
| |
Operating Systems Supported
|
|
Windows Server 2003, Windows 2000 and MSCS (Microsoft Cluster Server), Windows NT, Sun/Solaris, Linux, Tru64 Unix, HP/UX, IBM AIX, SGI IRIX, MAC OS, FreeBSD, Novell, OS/2, and others to be announced
|
Environmental
|
| |
Temperature
|
|
50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating
|
| |
Relative Humidity
|
|
10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)
|
| |
Certifications
|
|
FCC, CE, TUV, and UL/CSA
|
Physical
|
| |
Size/Weight
|
|
19" wide, 22" deep, 5.25" (3U) high, 40 lb. / 18 kg. (without disk drives)
|
| |
I/O Connectors
|
|
Two SFP Fiber Channel
Two 9-pin DB9 type RS-232 serial terminal port UPS port
RJ45 Management Port / Ethernet
|
| |
Power Required
|
|
110 or 220 VAC, ±20% @ 6 amps / 3 amps peak; 47 to 63 Hz. autosensing
Three independent power inputs
|
|
|
JStor-4 SATA 3U with MDF
|
|
|
Exclusive MDF (Multiple Drives Failure) capabilities (RAID 6) provides the highest level of data protection. Multiple simultaneous drive failures can be tolerated without downtime or data loss.
Array Roaming feature gives administrators the ability to move a complete raid set to another system without losing RAID configuration and data on that raid set.
Redundant Flash Image provides an extra layer of protection against the firmware image corruption. If the primary firmware of the RAID controller becomes corrupted, the secondary firmware image will automatically be used.
Full 48-bit ATA addressing standard support allows for up to 144 petabytes capacity per drive to be utilized in the RAID array.
ASIC assisted parity for lightning-fast throughput.
RAID controller provides RAID 0, 0+1, 1, 3, 5, and RAID 6, Global Hot Spare Disk, Auto Rebuild, and up to 1GB of DDR ECC SDRAM-based data cache.
Intelligent IDE/ATA backplane design (uses no cables) allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance.
SNMP supported.
Built-in management ethernet port provides easy access to the web-based GUI RAID Manager for configuration, management, and monitoring functions. E-mail event notification built in.
Completely user configurable via the front panel.
Online Parity Consistency verification feature insures RAID set integrity.
|
|
;)
;)