JStor-4 SATA (Serial ATA) 12-bay RAID Array
with MDF (Multiple Drives Failure) capabilities
Dual SCSI Host Interfaces

Key Benefits
Raising the bar to a new level, JStor-4 SATA 12 bay RAID array delivers reliable data protection combined with the blazing performance of Ultra320 SCSI to support mission critical business applications. Engineered to meet stringent demands for continuous availability, JStor SATA 12 bay RAID array features powerful 400MHz 64-bit RISC processor for blazingly fast I/O operations, parity-assist ASIC, completely cableless backplane-based design, and storage capacities reaching 5TB in one small 2U enclosure.

Low service and integration costs are assured by the JStor's cableless design, two redundant hot-swappable power supplies with two independent power inputs, turbo cooling fans, and embedded RAID controller. Three year warranty comes standard with every array and covers all components.

The JStor SATA 12bay RAID addresses many challenges present in datacenters and delivers unparalleled storage flexibility, higher levels of data availability, management and configuration simplicity, all while securing maximum investment protection to support future growth.




Drive Capacity
Serial ATA drive capacities of 36GB (10,000 rpm), 80GB (7,200 rpm), 120GB (7,200 rpm), 160GB (7,200 rpm), 200GB (7,200 rpm), 250GB (7,200 rpm), 300GB (7,200 rpm), and 400GB (7,200 rpm) are available.

Full 48-bit ATA addressing standard support.

Maximum capacity 4.8TB when using 400GB drives.




Technical Specifications
General
  
RAID Architecture
   

64-bit RISC 400MHz CPU with 266MHz memory bus
Up to 1600 Mbytes/sec internal bandwidth
133 MHz PCI-X interface to the backplane

  
Host Bus Interface
   

Two, 320 MB/sec. Ultra320 LVD (Low Voltage Differential) SCSI

  
Disk Bus Interface
    Twelve 1.5 Gb PHY Serial ATA Interface channels; 48-bit addressing
  
Command Queuing
   

253 commands (host SCSI channels)

  
Cache
   

Up to 1GB (using one, industry-standard DDR SDRAM)

  
Operating Systems Supported
    Windows Server 2003, Windows 2000 and MSCS (Microsoft Cluster Server), Windows NT, Sun/Solaris, Linux, Tru64 Unix, HP/UX, IBM AIX, SGI IRIX, MAC OS, FreeBSD, Novell, OS/2, and others to be announced



Environmental
  
Temperature
    50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating
  
Relative Humidity
    10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)
  
Certifications
    FCC, CE, TUV, and UL/CSA



Physical
  
Size/Weight
    19" wide, 21" deep, 3.5" (2U) high, 31 lb. / 14 kg. (without disk drives)
  
I/O Connectors
    Four standard 68-pin SCSI, two 9-pin DB9 type RS-232 serial terminal port and fax / pager port; Ethernet management port
  
Power Required
    110 or 220 VAC, ±20% @ 6 amps / 3 amps peak; 47 to 63 Hz. autosensing


     

 

Tower

JStor-4 SATA 2U with MDF

Back Drive Tray


Advanced Features

Exclusive MDF (Multiple Drives Failure) capabilities (RAID 6) provides the highest level of data protection. Multiple simultaneous drive failures can be tolerated without downtime or data loss.

Array Roaming feature gives administrators the ability to move a complete raid set to another system without losing RAID configuration and data on that raid set.

Redundant Flash Image provides an extra layer of protection against the firmware image corruption. If the primary firmware of the RAID controller becomes corrupted, the secondary firmware image will automatically be used.

Full 48-bit ATA addressing standard support allows for up to 144 petabytes capacity per drive to be utilized in the RAID array.

ASIC assisted parity for lightning-fast throughput.

SNMP supported.

RAID controller provides RAID 0, 0+1, 1, 3, 5, and RAID 6, Global Hot Spare Disk, Auto Rebuild, and up to 1GB of DDR ECC SDRAM-based data cache.

Intelligent IDE/ATA backplane design (uses no cables) allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance.

Built-in management ethernet port provides easy access to the web-based GUI RAID Manager for configuration, management, and monitoring functions. E-mail event notification built in.

Completely user configurable via the front panel.

Online Parity Consistency verification feature insures RAID set integrity.