Since being introduced as the world's first automated DLTtape™ library, over one thousand 2640 Series libraries have answered the call for a storage system with the extraordinary scalability needed to provide massive capacity and performance. Network Magazine's 1998 Product of the Year, the reliable 2640 continues to deliver on its promise of fast and continuous backup and restore.
162 GIGABYTES PER HOUR PERFORMANCE OR 9.24 TERABYTE CAPACITY
With up to 9 DLTtape drives or 264 DLTtape cartridges, a single 2640 module can backup and restore 162 gigabytes per hour and store 9.24 terabytes of data. Up to five 2640 modules can be configured with up to 45 DLTtape drives or 1,320 cartridges providing superior native backup performance of 810 gigabytes per hour or massive native capacity of 46.2 terabytes.
ABSOLUTE RELIABILITY WITH INTELLIGRIP INSIDE
The key to the 2640's reliability is IntelliGrip™, ATL's precision cartridge handling system. IntelliGrip utilizes precision timing and a highly exact amount of force to insert and remove DLTtape cartridges in a manner that reduces drive stress and minimizes surface contact to increase overall library reliability.
THE DLTtape STANDARD AMONG ISVS
ATL libraries are the most widely supported automated DLTtape libraries available. They are fully compatible with major hardware platforms, including IBM, HP, DEC, SUN and Silicon Graphics, and are supported by nearly 40 popular data management software applications.
LIBRARY ENHANCEMENTS
WebAdmin™ from ATL is the first software package allowing remote library administration using a Java™-enabled browser. WebAdmin provides system administrators the freedom to access their automated tape libraries from anywhere on the World Wide Web. From a friendly graphical user interface, system administrators and operators can perform a full suite of administration functions, including library configuration, monitoring, event logging and event notification.
|
2640 SERIES
FEATURES AND BENEFITS
- Reliable with mean-swap-between-failure rating of 1,000,000
- Up to 9 drives per module for 162 gigabytes per hour back-up performance
- Up to 264 cartridges per module for 9.24 terabytes of storage capacity
- Scalable in the field to 5 modules with 45 DLTtape drives or 1,320 DLTtape cartridges
- Easy cartridge bulk loading and unloading with 11-slot magazines
- Load port with cartridge mail box for single cartridge loading and unloading
- Front door with window for easy access and viewing
- Supported by nearly 40 major storage management software applications
- Compatible with major hardware platforms
- Bar code reader included
STANDARD LIBRARY FEATURES
- 3-of-9, 6-digit bar code reader
- Load port device with cartridge mailbox for individual cartridge loading
- Supports multi-initiator systems
- Automatic cleaning of DLTtape drives
- Inport/outport device unloads up to 12 cartridges at a time
- Pass-through mechanism for basic or StorLink unit
- Multi-unit controller permits single host interface to control up to five library units
|
|
Communication Interfaces
Host to Library
Electrical....................
DLT4000 | Differential SCSI-2
50-pin Centronics
female connector |
Electrical....................
DLT7000 | Differential SCSI-3 "P" Fast &
Wide68-pin Micro-D femaleconnector |
| Port............................ | 9 pin, RS-232C with
EIA/TIA-574
female connector |
| Software.................... | SCSI-2 medium
changer command set |
Host to Tape Drives
Electrical....................
DLT4000 | Differential SCSI-2, 50 pinCentronics female connector |
Electrical....................
DLT7000 | Differential SCS1-3 "P" Fast & Wide, 68-pin Micro-D female
connector |
| Software.................... | SCSI-2 |
Library Diagnostics
| Port.......................... | 9-pin RS-232C, EIA/TIA-574 female (cable included) |
| Diagnostics............... | RS-232C service port for connection to field service PC running diagnostic software |
Control Panel Features and Functions
| Port........................... | Standby and
motor power switches
Carousel rotate switches Standby status
light Fault light
Status display
"current face" or
error code |
Cabinet Characteristics
| Height....................... | 78.7 inches (200 cm) |
| Width........................ | 28.2 inches (72 cm)
40.2 inches (102 cm)
including IOD |
| Depth........................ | 47 inches (120 cm) |
| Weight...................... | 950 pounds (430 kg)
with drives and cartridges |
Power Input
| Power
Cord............ | IEC 320 male connector
(Power cord with
NEMA 5-15 P connector included) 47-63 Hz at 90-132
Vac or 180-264 Vac |
| Power Consumption (robotics and seven drives)
| DLT4000 | DLT7000 |
| Standby................... | 200-watt, 330 VA | 250-watt, 410 VA |
| (nominal) |
| Average running..... | 360-watt, 600 VA | 410-watt, 680 VA |
| (100% duty cycle) |
| Peak running.......... | 540-watt, 900 VA | 590-watt, 980 VA |
| (worst case move) | |
Environmental
| Operating |
| ....Humidity............... | 30% to 80%, non-condensing |
| ....Temperature.......... | 15 °C to 32 °C (59 °F to 90 °F) |
| ....Altitude................. | Sea level to 8,000 ft. |
| Non-operating (storage & shipping) |
| ....Humidity............... | 5% to 95%, non-condensing |
| ....Temperature.......... | -40 °C to 66 °C (-40 °F to 151 °F) |
| ....Altitude................. | Sea level to 14,000 ft. |
Agency Approvals
| Safety................. | UL 1950 Listed, CSA, C22.2-No. 950
TUV-EN60950 |
| Emission............ | FCC Part 15B Class A, CE Mark, VCCI
Class 1 |
Robotics Reliability
| MTBF.................... | 80,000 power-on hours |
| MSBF.................... | 1 million load/unload cycles (swaps) |
| MTTR.................... | Less than 30 minutes |
|
2640 Series Specifications