Unylogix - QLogic SANbox-64/128 Director Technical Specifications
 

QLogic Fibre Channel Switches
 
SANbox-64/128 Director Technical Specifications
RAS Features
 
  • Passive backplane
  • Redundant internal data paths
  • Redundant switching core
  • Hot-swappable 8-port plug-in modules
  • Redundant hot-swappable fan/power supply option
  • Hot-pluggable, industry standard GBICs Auto-sensing, self-configuring ports
  • Non-disruptive maintenance and firmware loads
  • Redundant maintenance processors/ports
  • ASIC-embedded memory
  • Fault-detection and isolation with automatic internal failover
    • Top of page
    Performance
    Fabric Port Speed
  • 1.0625 Gb/s, full-duplex
    • Fabric Latency
  • < 0.6 ΅s to 3 ΅s, depending on RAS features implemented
  • Cut-through routing
    • Fabric Point-to-Point Bandwidth
  • 103 MB/s
    • Fabric Aggregate Bandwidth
  • Single chassis: Up to 64 Gb/s end-to-end
  • Non-blocking architecture
    • Maximum Frame Sizes
  • 2148 bytes (2112 byte payload)
    • Pre-port Buffering
  • ASIC-embedded memory (non-shared)
  • Each port has a guaranteed 8-credit buffer for full performance well over the 10km spec of longwave optics
    • Modes of Operation
  • Fibre Channel Class 2 and 3 (connectionless)
  • Fabric
  • SANbox FLS™
         — Public loop
         — Private loop
         — Segmented private loop
         — Private-to-public (fabric) bridging
         — Public (fabric)-to-private bridging
  • Broadcast
    • Top of page
    Scalability
    Ports Per Chassis
  • 8 - 64 universal ports, populated in 8-port increments
  • Optional backplane interconnect module links two chassis for total of 128 non-blocking ports
    • Multi-switch Fabrics
  • Supports all topologies, including: cascade, cascaded loop, mesh and Multistage™
  • Supports multiple links between switches
  • In-order delivery of frames in all multi-switch and multi-link configurations
    • Fabric Port Types
  • All ports can assume the following states:
         — F_port: Fabric
         — FL_port: Fabric loop (public loop)
         — E_port: Switch-to-switch
         — TL_port: Translative mode (private-to-
    public/public-to-private bridging)
         — SL_port: Segmented mode (Segment
    private loops for reduced arbitration. Allows switch to replace and improve on the
    performance of a hub)
  • All ports are auto-discovering, self-configuring
    		•
    Media Type
    		Hot-pluggable, industry-standard Gigabit Interface Converters (GBICs)
    Supported GBIC Types
  • Shortwave:
    		• 100-M5-SN-I
  • Longwave:
    		• 100-SM-LL-L
  • Copper  HSSDC:
    		• 100-TW-EL-S
  • Copper  DB9:
    		• 100-TW-EL-S
  • Any GBIC type can be used in any fabric port.
    • Media Transmission Ranges
  • Optical
         — Shortwave: 500 m (1,640 ft.)
         — Longwave: 10 km (6.2 mi.)
         — With repeaters: 20-30 km (12-18 mi.)
  • Copper: 13 m (43 ft.) uncompensated, or 30 m (129 ft.) compensated
    • Cable Types
  • 50/62.5 micron multimode fiber optic
  • 9 micron single-mode fiber optic
  • Copper
    • Top of page
    Fabric Management
    Management Processor
  • Superscalar Intel i960HA
    • Management Methods
  • SANsurfer™ embedded Web-based management tools (standard and private brand versions)
  • SNMP, TFTP, Telnet, SES, GS3
    • Access Methods
  • In-band
  • Ethernet 10/100 with RJ45
    • Diagnostics
  • Power-up self-test of all functionality except media modules
  • Field-selectable full self-test including media modules
    • Fabric Services
  • Simple Name Server
  • SANguard™ Zoning
         — Hardware-based
         — Broadcast
         — Name Server
         — All zoning assigned on per-node basis, even across multi-stage fabrics
  • Registered State Change Notification (RSCN)
  • Multi-chassis in-order delivery
  • Automatic Path Selection (APS) in multi-stage configurations
  • Data Streaming Facility™
    • User Interface

  • LED indicators, command console, and web-based utilities
    • Top of page
    Standards
    Fibre Channel Protocols 
  • FC-PH Rev 4.3
  • FC-PH-2
  • FC-PH-3
  • FC-AL Rev 4.5
  • FC-AL-2 Rev. 7.0 (draft)
  • FC-FLA
  • FC-GS-2
  • FC-FG
  • FC-PLDA
  • FC-Tape
  • FC-VI
  • FC-SW-2 (when complete)
  • Fibre Channel Element MIB
    • Top of page
    Interoperability
  • Fully interoperable with all SANbox products
  • Backwards compatible with all GigWorks MKII products
  • Compatible with OSFI-compliant devices
  • QLogic SANtrack Certified
    • Top of page
    Physical Dimensions
    Single 64-port chassis
  • Width: 19" rack mount
  • Height: 33.25"
  • Depth: 22.5" (30" with backplane interconnect module

  • The 128-port unit can be mounted in a standard 70" high, 19" rack
  • Optional redundant power supplies
    • Top of page
    Environmental
    Operating
  • Temperature:
    		• +0°C to +40°C
  • Humidity:
    		• 20% to 80% non-condensing
  • Altitude:
    		• 0 to +10,000 feet
  • Vibration:
    		• IEC 68-2-34
    5-500 Hz, random,
    0.21 G rms, 10 minutes
  • Shock:
    		• IEC 68-2-27
    4 g, 11 ms, 20 repetitions
    Non-operating
  • Temperature:
    		• -18°C to +49°C
  • Humidity:
    		• 8% to 90% non-condensing
  • Altitude:
    		• 0 to +50,000 feet
  • Vibration:
    		• IEC 68-2-34
    5 to 500 Hz, random,
    2.09 G rms, 10 minutes
  • Shock:
    		• IEC 68-2-27
    30 g, 292 ips, 13 msec,
    3 repetitions, 3 axis
    Top of page
    Electrical
    Power Requirements
  • Single phase 208 Volt
  • 20 Amp service
  • 47-63 Hz
    • Heat Output
  • 1800 watts fully populated
    • Top of page
    Regulatory
    Country Safety EMC
    Canada ULC 1950 ICES-003 Issue 3
    United States UL 1950 FCC Part 15 Class A
    Japan   VCCI Class A
    Australia   AS/NZS 3548
    European Community EN60950 A4
    CB-Scheme    		 EN55022 Level A
    EN50082-1 (immunity)
    Top of page

    SANbox, SANsurfer, SANguard, FLS, Multistage, QLogic and the QLogic logo are the marks and property of QLogic, Inc. ©1999